Cleaning a boat regularly can be a huge struggle for you especially if you sail quite frequently. Doing this manually seems pretty hectic for the body and not practical and requires a better solution so that your boat can work swiftly pump.
In these situations, a saltwater washdown pump can come off as pretty handy that can be used to remove the jetsam, flotsam, and other debris from the bottom of your ship or boat.
Learn about five ways that you can use to make your washdown pump work perfectly and get your boat running.
What is a saltwater washdown pump?
A saltwater washdown pump is a type of submersible pump used in residential and commercial areas like homes, restaurants, and businesses. They are typically installed below the surface of a body of water, like a well or pond. These are used to move water within a building structure and help remove water from an area after flooding, leaks, or other water-related problems occur. They’re also used as part of a fire protection system in some locations.
3 ways to make your saltwater washdown pump work perfectly?
Choose the right pump
Choosing the right washdown pump can save you lots of time and money—a properly sized can run longer, work more efficiently and have fewer maintenance issues.
Before you select a saltwater washdown, you must consider several factors to ensure the best performance for your application. The following five tips will help you choose the right for your needs:
Know how much flow is required for your specific system. A common mistake is choosing a that offers more flow than necessary. Most water systems require only 2-3 GPM (gallons per minute) of flow, but it can be difficult to determine how much flow is needed without doing some research.
Make sure the pump is installed adequately
Direct installation of these is easy but if it is not properly installed, it can cause major problems. Make sure the washdown pump is underwater – If the is exposed to air, it will rust and corrode. Also, ensure that you completely submerge the in water so that it will be able to operate properly.
When you place the in its casing, be careful of any holes or gaps in order to keep any water from seeping in.
Make sure you use an adequate hose which should have a diameter of at least 1/4 inch and must be made of PVC or another type of waterproof rubber so that no moisture can penetrate it.
The saltwater pump should have thru-hull
A thru-hull is the most reliable way to get saltwater to work. It attaches to the hull of your boat and sends water from the ocean into the pump, where it’s cleaned and then through hoses to wash down decks and other parts of your boat.
Trouble often arises when people are trying to run a saltwater washdown without a thru-hull. This usually happens because the manufacturer didn’t include one with your pump. Running salt water without a thru-hull can lead to serious damage to itself. The parts can fail sooner than they would have if you’d used a thru-hull in the first place.
These were some of the most important tips to help your washdown work perfectly. Make sure you purchase the tool by doing your research and installing it according to the industry manual.
