Fix Printer Error Code 0x803c010b Instantly

Maximum number of printer owners claimed they encountered error code 0x803c010b. This is often related to printer models that were not expected.

Users claim that the printer models stopped printing jobs and eventually quit working. Users noticed a strange hex-coded error message stating that 0x803C010B was the error code when they tried to initiate the built-in troubleshooter.

This annoying 0x803c010b error code prevents your printer model from performing its operations. To restore your printer model’s working order, you must immediately correct this technical error.

If you are already facing this error and don’t know what to do, then read this article carefully until the end for effective solutions.

Let’s first look at the possible causes of this printer error code before we get to the solution.

Possible Reasons for the Printer Error Code 0x803c010b:

Keep in mind that the printer error codes are not always caused by one cause.

You should also realize that the error code you get on your printer may not be the same one you have been experiencing.

We have listed some common and general reasons why this error code appears on certain printer models.

• The Simple Network Management Protocol (SNMP), which is used to manage printer devices, can cause this problem. This protocol is used to communicate with the printers and provide data status.
• This error code may appear on your printer device due to technical problems with the printer driver.
• This error could be caused by technical issues within the printer device.
• This annoying error code may also appear on your printer due to a connection problem.

Let’s now take a look to the solution section of this article, in order to eliminate this annoying error code yourself.

How to Fix Printer Error Code 0x803c010b? Try Out the Effective Ways 

There are many reasons your printer model is showing this error, as we have already explained.

It is now much easier to fix this error code 0x803c010b now that you know what the possible causes are.

So, let’s not hesitate to get straight into the printer repair dubai .

Way 1:  Reinstall the Printer Device

You can fix minor technical issues by reinstalling your printer device. Follow these simple steps to reinstall your printer device.

1. To open the Start menu, first go to it and then tap on it.
2. You will now see a list with options. Select the Control Panel from the Start menu.
3. Alternativly, press the Windows logo key while simultaneously pressing the X key. This combination will open the Control Panel.
4. Tap on Hardware and Sound under the Control Panel menu.
5. Next, select the Devices and printers option from the Hardware and sound menu
6. You will now see a list with printer models. Select the printer model from the list and right-click the model that is experiencing this technical error.
7. To move on, tap the “Remove Device” option.
8. You will now receive a confirmation window.
9. To confirm your selection, tap on the Yes button within the confirmation window.
10. You will now see that the connected printer device has been removed from your system.
11. After this, unplug your printer device and start the Windows system over again.
12. Plug in the Printer device after restarting the windows system to reinstall your printer.

For good measure, restart the system. Check your printer model after you have completed the above steps to confirm that the problem is fixed.

If the error persists, you can try the following troubleshooting methods.

Way 2: Disable the Protocol

This is the best way to eliminate this annoying error code.

Several printer users also reported that they were able to resolve this problem by disabling the Simple Network Management Protocol, SNMP.

This isn’t a difficult task. These steps will enable you to disable the Simple Network Management Protocol, (SNMP).

1. To open the Start menu, first go to it and then tap on it.
2. You will now see a list with options. Select the Control Panel from the Start menu.
3. Alternativly, press the Windows logo key while simultaneously pressing the X key. This combination will open the Control Panel.
4. Tap on Hardware and Sound under the Control Panel menu.
5. Next, select the Devices and printers option from the Hardware and sound menu
6. You will now see a list with printer models. Select the printer model you wish to fix the error from the list.
7. From the list of options, tap on the Properties option.
8. You will now see a new window.
9. Click on the Ports tab in the Printer Properties screen.
10. Navigate next through the port list.
11. To move on, tap the Standard TCP/IP Port.
12. Check the box. Next, tap on “Configure Port”. This option might be found in the Ports section.

Whenever you see the next window, click on the SNMP Status Enabled option.

Next, remove the checkbox for the Simple Network Management Protocol status Enabled option. Finally, click on the OK button. To save any changes you make, click on the Apply button.

Once you have completed all of the steps above, it is time to restart the system. Finally, verify the printer model to confirm that the problem is fixed.

If the error code 0x803c010b persists on your printer model, then it is recommended to proceed to the next troubleshooting step.