When the message is received Canon Printer Error Code 6000 people A problem with the printer has occurred. Turn the printer off and then back on. Consult the instructions if the problem persists.” If this message appears, something may be preventing the paper feed tray from opening. If the printer is surrounded by documents or you’re copying huge documents like books, make sure there’s enough room in front of the tray before you print or copy. If you see something in front of the tray when the error message above appears, remove it. The printer will then be ready to print after you switch it off and on again. If the problem persists, contact a repair service.
What Could Be the Cause of Canon Printer Error 6000?
Some frequent adverse situations that may cause this error with your Canon printer are listed below.
1 – It usually occurs when something gets stuck in the printer’s paper feed tray, usually dust particles or paper bits, preventing it from opening. The input tray of the printer assembly is not installed correctly. A lot of documents near the printer, Title page is scratched or stained, Give different commands to print on paper at the same time, Error in sensor block or inline padding slot.
2 – When the tray is not properly installed in the printer, this error number may appear.
3 – When we try to print numerous sheets of paper at the same time, we may get this problem.
4 – When the printer is surrounded by a large number of documents, it may also appear on your system.
5 – Scratched or smeared line feed is used.
6 – When a problem with the sensor unit or the in-line feed slit occurs.The 6000 error happens when you try to print while the tray won’t open.
7 – Remove any physical things that are preventing the tray from opening and turn off the printer in this situation. Then, turn the printer back on and provide a new printing command.
8 – The 6000 error occurs when you order printing while the tray is covered.
Remove any objects that are covering the tray and turn the printer off if this is the case. Then, turn the printer back on and provide a new printing command.
HOW DO I Fix THE CANON PRINTER ERROR 6000?
When you encounter the printer error 6000, you will see the following message: “The 6000 printer error has occurred.” Turn the printer off and then back on. If the issue persists, see the handbook.”
1 – There are foreign things blocking the appropriate opening of the paper feed tray, such as dust particles, paper bits, pins, stickers, or other objects. The printer displays the error 6000 as a result of the jam.
2 – the paper feed tray is not properly install so you get the error code
3 – It’s possible that the paper became trapped in the feed if you mistakenly sent multiple print commands at the same moment.
4 – The error 6000 may occur if the printer is surrounded by a large number of other papers that prevent appropriate ventilation of the printer fans.
5 – There is a problem with the printer’s sensor unit or in-line feed slot.Despite the fact that there are many probable causes for error 6000 on your printer, the most typical cause is paper or foreign items stuck in the input tray. So, to discover how to fix Canon printer error 6000, follow the instructions outlined below.
6 – The first step is to reset the printer. When you get error 6000, most of the time simply restarting the printer is sufficient to resolve the issue. Unplug your printer first before attempting to reset it. Wait a few seconds after unplugging it before connecting it back in.
7 – Now press and hold the “Power” button for a few of seconds. Press the “Stop” button twice after a few seconds. Repeat this method two or three times more. When you let go of the power button, do so slowly.
8 – To finish, press the “Stop” button four times. These procedures will undoubtedly resolve your issue. If that doesn’t work, try the following.
Remove the paper feed tray and clean it
Locate the paper feed tray by opening the printer lid. Take all of the papers out of the tray. Look inside the paper tray for any torn pieces of paper or clips that may have become lodged inside.
- These alien items obstruct the paper’s smooth processing. Attempt to disassemble the paper tray after removing all of the papers. If the tray can be removed, correctly replace it so that the fit is tight and secure. If not, double-check that it’s properly installed. Reassemble all of the papers and turn on the printer. This should resolve your 6000 errors.
- If you’re still having trouble figuring out how to fix Canon printer error 6000, contact the customer care team, who will be happy to help you with any further questions. Simply tell them everything you’ve tried, and they’ll direct you to the next measures you need to take.
Reasons for Canon Printer Error 6000
Possible causes of Canon printer error 6000 are Given below.
- printer’s feed tray open.
- Blockage due to paper fragments or dust particles.
- tray position wrong in the printer, the error code will appear.
- If you issue multiple print commands at the same time, the error can occur.
- It can also happen when your printer is surrounded by a big number of documents.
- line feed scraped.
- In-line feed slit or sensor unit problems are another cause of Canon support code 6000.Conclusion:Even if you command a print job, if something is in front of the paper feed tray, the tray may not open. As a result, the 6000 error trigger. Remove any physical things that are preventing the tray from opening and turn off the printer in this situation. Then, turn the printer back on and provide a new printing command.
FAQ:
- How do I fix my Canon 6000 error?
The 6000 error happens when you try to print while the tray won’t open. Remove any physical things that are preventing the tray from opening and turn off the printer in this situation. - What is the procedure for resetting my Canon printer?
Press Setup ,
1 – Then press OK after navigating to Device settings with the arrow buttons,
2 – Then press OK after navigating to Reset setting using the arrow buttons,
3 – Then press OK after navigating to Reset all using the arrow buttons,
Yes is the answer,
Select OK. - What is the solution to Canon’s Error Number 6000?
The Canon Printer Error Code 6000 indicates that anything in the printer is obstructing carriage movement. In any case, I was able to pinpoint the problem: a ripped piece of paper on the left side of the printer. It is challenging to achieve, but it is possible. The printer is now up and running! However, a software problem might sometimes cause this. - What should I do if I get a Canon printer error?
1 – Reset Canon printer
2 – Turn the printer on,
3 – Hold down the Stop/Reset button for a few seconds,
4 – Hold down the button that allows you to make a colour copy,
5 – Take a 5-second break,
6 – The printer now restarts and configures itself,
7 – The printer indicate that the device needs to be calibrated,
8 – You’ve reset your printer.
Why does my Canon printer keep saying error?
Canon printers generate error codes for a variety of reasons: Your printer’s settings may not be compatible with the document you’re attempting to print. It’s possible that the loading bay for your paper has been clogged with paper, or that you’re using the incorrect type of paper.
Read Also- How to Reset Canon Printer
