How to Set up a Home Wi-Fi Network Setup

Wi-fi network is a standard nowadays, and it’s used to connect multiple devices such as laptops, tablets, and smartphones. In this tutorial, we will discuss how to set up a wireless internet network at home or in your small office area, and how to connect it with the internet. If you are looking for an easy way to get connected with the world wide web without any hassles, then this is the guide for you.

To better understand setting up a wireless home network, you must first learn some of the basics of Wi-Fi technology. So before I go over the steps to set up a home network, let me give you an overview of Wi-Fi technology and how wireless internet works.

What is Wi-Fi Technology?

Let’s first know what does Wi-Fi stands for: Wi-Fi is a wireless technology used to connect PC, tablets, smartphones, and other devices to the Internet. Wi-Fi is a radio signal sent from a wireless router to a nearby connected device that converts the signal into data that you can see and use. It is a set of standards technology that allows connection between devices without any cables. Wi-Fi technology not only helps us get rid of wired connections to access the Internet but also allows different users to use the Internet connection at the same time.

Purchase a wi-fi Router

To create your own Wi-Fi network, first, you need the best wi-fi router. This is the wireless device so as to broadcast the Wi-Fi signal from your Internet modem at some stage in your house. Your Internet provider might also additionally provide you a wi-fi router for your home. If you’ve you’ve never set up a wireless network before, this may help a lot. Steps for home wireless network setup for home.

Now that you know the basics of Wi-Fi technology, let me show you how to set up your home network. To create a wireless home network, you will need a wireless router, a computer or laptop with wireless connectivity, a modem (cable, fiber), and two Ethernet cables.

Here are the steps below for setting up a home network:

STEP 1.

• Find the best location in your home to place your wireless router. Its optimal location is in the center of your home, without obstacles that can interfere with the wireless signal.

STEP 2.

• Unplug your Internet cable or DSL modem.

STEP 3.

• Connect the wifi router to your internet modem. To do this, plug an Ethernet cable that came with the router into the square connector on the back of the modem, and then plug the other end of the cable into a square connector on the back of the modem.

STEP 4.

• Turn on the modem (wait a minute or two) and then turn on the router (wait a minute or two). At startup, the router and modem LEDs usually blink.

STEP 5.

• Using a different Ethernet cable, connect your computer to the LAN port of the router and turn on the computer. This connection is temporary.

STEP 6.

• Open a browser and enter the IP address of the router indicated in the manual for the router, it should look like 192.168.0.1, in the address bar of the browser and press Enter.

STEP 7.

• You will see the router login screen asking for the default administrator username and password, which you will get from the manual for the router.

STEP 8.

• Change your router’s default administrator username and password to protect your home network. Keeping the default password compromises the security of your wireless network and can make your router accessible to anyone.

STEP 9.

• Make sure your router is running the latest manufacturer firmware. This is good practice because you never know how long the router was in the store before it came into your hands. In addition, firmware updates can respond to many potential problems before you find them.

STEP 10.

• Add WPA2 security before setting up your home network. WPA2 security is essential for setting up your home wireless network. You can find this setting in the WLAN security section, in which you select the type of encryption to be used and then enter a password.

The most advanced encryption method for protecting your home network settings is the latest WiFi Protected Access 2 (WPA2), the best wireless encryption standard available today.

Note: WPA2 encryption has two modes: personal mode and business model.

Personal Mode: It is created for home and small office networks that do not require the complexity of the authentication server. Here the wireless network device encrypts the network data with a 256-bit key and allows users to set a strong password.

Business Mode: It is designed for corporate networks and requires an authentication server. This mode requires a more complex configuration, but provides enhanced security and is not recommended for home or small office use.

STEP 11.

• Change the wireless network name (SSID). Choose a descriptive name for your SSID (Service Group Identifier) ​​to make it easier to identify your network.

STEP 12.

• After saving the above configuration parameters to the router, you can temporarily disconnect your computer from the router. Now connect your wireless USB adapter or PC card to your laptop if you don’t have a wireless adapter installed. or built-in (many older machines don’t have it). Your computer may install the driver automatically, or you may have to use the installation CD that came with the adapter to install it.

STEP 13.

• Finally, connect to your home wireless network.

Thank You