Worrying about how to setup tp link wifi extender?

All types of range extenders by TP-Link have a common and easy web interface tplinkrepeater.net. It helps the users get rid of the trouble ‘how to set up tp link wifi extender.’ The web interface tplink Repeater is simple for these extenders. The simplicity and uncomplicated setup allow the users to set up and use the extended network without hassle.

Tplink repeaters are the best WIFI extenders compared to the other range extenders available in the market. Their compact size, budget-friendly price, and simple design pull many customers towards this product. However, the hardware of this network provides a reliable network extension. You can get all types of wireless repeaters for your home and business requirements.

Learn about how to set up tp link wifi extender with ease?

You can use any following methods to set up and install your TP-Link repeater. Just follow the instructions carefully.

Set Up your Tplink wifi extender

1. Plug the range extender near your functioning router and switch it on.
2. Press the WPS button on your TP-Link wifi range extender.
3. Wait for the LED button in your wifi extender to start blinking rapidly.
4. Press the WPS button on your router on seeing the flashing LED on your extender.
5. You have only two minutes to press the WPS button on your wifi extender and the router.
6. Both the devices will communicate with each other within two minutes.

Once the Wi-Fi LED is solid on your range extender, you can connect to your extended network using the default credential. You can now access the internet from your tp link wifi extender. Now you better know how to set up tp link wifi extender with ease.

Reset your TP-link wifi extender if the login fails?

Are you unable to resolve the matter of how to set up a wifi extender? Do you tp link router login fail again and again? If so, then refer to the following steps to perform a factory reset on your device.

1. To ensure that your TP-Link device is on, connect it to a power source.
2. You should find the reset button on either side or bottom of your range extender
3. Press and hold down the reset button on the extender for at least ten seconds and let go after 10 seconds
4. The LED lights on your extender will go out and gradually turn off.
5. Access the tp-link wifi extender login page to associate to the router by connecting to the extender’s Wi-Fi signal.
6. After the setup, you should check the internet connection on the extender.

How to set up a wifi extender after a successful reset?

You might wonder how to set up a wifi extender after a successful reset process. After a factory reset, the setup and installation process for most TP-Link repeaters is the same. There is not much variation in the options under the dashboard section. You have to connect the repeater to the router network and configure it using any computer, laptop, or mobile device.

1. To be connected, power on the device, in which you will do the configurations.
2. Open up a web browser of your choice on a device connected to the extended network.
3. Go into the address bar of your browser. And then type tplinkrepeater.net or 192.168.1.0
   to get the settings.
4. Type the default username and password to login to the settings of tplinkrepeater.net Login Page
5. You can use the web interface of your TP-Link repeater to monitor, control, and manage the settings of your extended network.

The default tp-link router login credentials are mentioned on the label of the device. Once you log in to the web interface, you can configure all the TP-Link extenders. In this way, you have resolved the issue of how to set up a wifi extender after a successful factory reset.